Aberlink CMM Camera

Aberlink CMM Camera System

Touch & Vision on the same CMM

Aberlink's advanced camera system and vision measurement software module, offer a non-contact measuring method on any Aberlink bridge-style CMM.

An innovative design of magnetic, kinematic joint allows a standard touch probe to be swapped with the camera in seconds. This means that components can be easily and quickly inspected using both touch trigger and vision inspection technology on the very same CMM.

The camera incorporates a telecentric lens that gives a distortion-free image on the monitor and also, a fully programmable 16-LED light ring which contains alternate white and UV LEDs. The white LEDs provide surface illumination in the normal manner while the UV LEDs provide an elegant solution to the problem of backlighting on a CMM - the component to be measured is placed on a plate which reflects the UV light and functions as backlighting.

Product Overview

  • 01 Key Features
    • Swap between touch probe and CMM camera in seconds
    • Use touch and vision technology within the same inspection programme
    • High precision edge detection for feature inspection
    • Thread measurement - min/max/mean pitch, left/right angles, effective diameter
    • Fully programmable digital zoom (no need to change lenses)
    • Directional overhead lights and back light for profile and surface feature inspection
    • Telecentric lens measures accurately even when the feature is out of focus
    • Accurate inspection of 3D and turned parts with the optional collimated light
  • Sensor Resolution Stand Off Field of View Pixel Size
    3 megapixel high speed colour camera 2048 x 1536 (QXGA) min 125mm | max 1000mm (manually adjusted) min 9.5mm | max 125mm min 4.8 µm | max 48 µm

Find out more about the Aberlink CMM Camera